Catalogs

WCMT-1.21.20.2-PEF-DPC25UT/ WCMT-06T101-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Product Information

WCMT-1.21.20.2-PEF-DPC25UT

WCMT-020101-PEF-DPC25UT

7° Positive

73310180251

$7.71

WCMT-1.21.20.2-PEF-DPC25UT/ WCMT-06T101-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

HP-High Performance 7° ISO Insert

Finishing

Stainless Steel,Carbon & Alloy Steel

(Pack of 5)

ANSI(Inch)

0.019 Inch

0.062 Inch

0.156 Inch

0.078 Inch

0.004 Inch

0.0015 Pounds

0.015 Pounds

0.004 Inch

0.118 Inch

0.004 Inch

0.200 Inch

570

950

ISO(Metric)

0.500 mm

1.590 mm

3.970 mm

2.000 mm

0.100 mm

0.700 Grams

7.000 Grams

0.100 mm

3.000 mm

0.100 mm

0.500 mm

173

288

80° Trigon

Neutral

WCMT-1.21.20.2-PEF

DPC25UT

PEF

The DPC25UT grade, has a hard, tough, wear and abrasive Resistant Substrate with a CVD Multi Layer of Alumina, Titanium Carbonitride Coating, (Al2O3/TiCN/Al2O3/TiCN). Medium Cutting Speed, for Universal Turning Application, from Finishing to Roughing. To cut Carbon Steel, Alloy Steel and Stainless Steel at Medium SFM (Vc) for Light interrupted Cut

CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

3

Carbide