Catalogs

WCGT-1.51.50.2-UEU-DUP15VT/ WCGT-S30201-UEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Product Information

WCGT-1.51.50.2-UEU-DUP15VT

WCGT-S30201-UEU-DUP15VT

7° Positive

73310179711

$13.41

WCGT-1.51.50.2-UEU-DUP15VT/ WCGT-S30201-UEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance 7° ISO Insert

General

High Temp and Super Alloys,Multi Materials

(Pack of 5)

ANSI(Inch)

0.029 Inch

0.093 Inch

0.187 Inch

0.118 Inch

0.004 Inch

0.0015 Pounds

0.015 Pounds

0.002 Inch

0.039 Inch

0.002 Inch

0.008 Inch

69

2067

ISO(Metric)

0.750 mm

2.380 mm

4.760 mm

3.000 mm

0.100 mm

0.700 Grams

7.000 Grams

0.050 mm

1.000 mm

0.050 mm

0.200 mm

21

626

80° Trigon

Neutral

WCGT-1.51.50.2-UEU

DUP15VT

UEU

The DUP15VT grade, has a hard, high abrasive and wear resistant substrate, with a Multi-Layer PVD-AlCrN coating, (Aluminum Chromium Nitride) for higher wear and heat resistant. For Finishing Turning Application, of High Temp Super Alloys, Ferrous and non Ferrous Materials, at High SFM (Vc) Brittle! Not for interrupted Cut. Wet or Dry Working Condition

Multi-Layer PVD-AlCrN coating, (Aluminum Chromium Nitride) for higher wear and heat resistant. For Finishing Turning Application of High Temp Super Alloys, Ferrous and non Ferrous Materials

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

3

Carbide