Catalogs

TPMR-321-PEU-DPC15HT/ TPMR-160304-PEU-DPC15HT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Product Information

TPMR-321-PEU-DPC15HT

TPMR-160304-PEU-DPC15HT

11° Positive

73310171951

$10.19

TPMR-321-PEU-DPC15HT/ TPMR-160304-PEU-DPC15HT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

HP-High Performance 7° ISO Insert

General

Stainless Steel,Carbon & Alloy Steel,Cast Iron

(Pack of 5)

ANSI(Inch)

0.314 Inch

0.013 Inch

0.375 Inch

0.629 Inch

0.015 Inch

0.0045 Pounds

0.045 Pounds

0.002 Inch

0.039 Inch

0.002 Inch

0.008 Inch

684

1140

ISO(Metric)

8.000 mm

3.180 mm

9.530 mm

16.000 mm

0.400 mm

2.100 Grams

21.000 Grams

0.050 mm

1.000 mm

0.050 mm

0.200 mm

207

346

60° Triangle

Neutral

TPMR-321-PEU

DPC15HT

PEU

The DPC15HT grade, has a hard, high wear and abrasive resistant substrate with a CVD Multi Layer of Alumina, Titanium Carbonitride Coating, (Al2O3/TiCN/Al2O3/TiCN). High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. To cut Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron at High SFM (Vc) Brittle! Not for interrupted Cut

CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for Medium speed turning of Carbon and Alloy Steel, Stainless Steel

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

3

Carbide