Catalogs

CCGT-32.51-UEU-DUP15VT/ CCGT-09T304-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Product Information

CCGT-32.51-UEU-DUP15VT

CCGT-09T304-UEU-DUP15VT

7° Positive

73310179466

$13.65

CCGT-32.51-UEU-DUP15VT/ CCGT-09T304-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance 7° ISO Insert

General

High Temp and Super Alloys,Multi Materials

(Pack of 5)

ANSI(Inch)

0.236 Inch

0.156 Inch

0.375 Inch

0.354 Inch

0.015 Inch

0.003 Pounds

0.030 Pounds

0.002 Inch

0.039 Inch

0.002 Inch

0.008 Inch

69

2067

ISO(Metric)

6.000 mm

3.970 mm

9.530 mm

9.000 mm

0.400 mm

1.400 Grams

14.000 Grams

0.050 mm

1.000 mm

0.050 mm

0.200 mm

21

626

80° Diamond

Neutral

CCGT-32.51-UEU

DUP15VT

UEU

The DUP15VT grade, has a hard, high abrasive and wear resistant substrate, with a Multi-Layer PVD-AlCrN coating, (Aluminum Chromium Nitride) for higher wear and heat resistant. For Finishing Turning Application, of High Temp Super Alloys, Ferrous and non Ferrous Materials, at High SFM (Vc) Brittle! Not for interrupted Cut. Wet or Dry Working Condition

Multi-Layer PVD-AlCrN coating, (Aluminum Chromium Nitride) for higher wear and heat resistant. For Finishing Turning Application of High Temp Super Alloys, Ferrous and non Ferrous Materials

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

2+2

Carbide