Catalogs

CCMT-32.52-PEF-DPC15HT/ CCMT-09T308-PEF-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Product Information

CCMT-32.52-PEF-DPC15HT

CCMT-09T308-PEF-DPC15HT

7° Positive

73310171885

$7.93

CCMT-32.52-PEF-DPC15HT/ CCMT-09T308-PEF-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance 7° ISO Insert

Finishing

Stainless Steel,Carbon & Alloy Steel,Cast Iron

(Pack of 5)

ANSI(Inch)

0.236 Inch

0.156 Inch

0.375 Inch

0.354 Inch

0.031 Inch

0.003 Pounds

0.030 Pounds

0.002 Inch

0.039 Inch

0.002 Inch

0.008 Inch

684

1140

ISO(Metric)

6.000 mm

3.970 mm

9.530 mm

9.000 mm

0.800 mm

1.400 Grams

14.000 Grams

0.050 mm

1.000 mm

0.050 mm

0.200 mm

207

346

80° Diamond

Neutral

CCMT-32.52-PEF

DPC15HT

PEF

The DPC15HT grade, has a hard, high wear and abrasive resistant substrate with a CVD Multi Layer of Alumina, Titanium Carbonitride Coating, (Al2O3/TiCN/Al2O3/TiCN). High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. To cut Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron at High SFM (Vc) Brittle! Not for interrupted Cut

CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

2+2

Carbide