Catalogs

CDGX-1.20.60.2-UEFL-DUP15VT/ CDGX-S4T001-UEFL-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Product Information

CDGX-1.20.60.2-UEFL-DUP15VT

CDGX-S4T001-UEFL-DUP15VT

15° Positive

73310168546

$15.06

CDGX-1.20.60.2-UEFL-DUP15VT/ CDGX-S4T001-UEFL-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance 7° ISO Insert

Precision Finishing

High Temp and Super Alloys,Multi Materials

(Pack of 5)

ANSI(Inch)

0.078 Inch

0.040 Inch

0.156 Inch

0.157 Inch

0.004 Inch

0.0015 Pounds

0.015 Pounds

0.002 Inch

0.039 Inch

0.002 Inch

0.008 Inch

69

2067

ISO(Metric)

2.000 mm

1.000 mm

3.970 mm

4.000 mm

0.100 mm

0.700 Grams

7.000 Grams

0.050 mm

1.000 mm

0.050 mm

0.200 mm

21

626

80° Diamond

Left

CDGX-1.20.60.2-UEFL

DUP15VT

UEFL

The DUP15VT grade, has a hard, high abrasive and wear resistant substrate, with a Multi-Layer PVD-AlCrN coating, (Aluminum Chromium Nitride) for higher wear and heat resistant. For Finishing Turning Application, of High Temp Super Alloys, Ferrous and non Ferrous Materials, at High SFM (Vc) Brittle! Not for interrupted Cut. Wet or Dry Working Condition

Multi-Layer PVD-AlCrN coating, (Aluminum Chromium Nitride) for higher wear and heat resistant. For Finishing Turning Application of High Temp Super Alloys, Ferrous and non Ferrous Materials

Special

2+2

Carbide