Catalogs

DCGT-21.51-UEU-DUP25GT/ DCGT-070204-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Product Information

DCGT-21.51-UEU-DUP25GT

DCGT-070204-UEU-DUP25GT

7° Positive

73310179538

$12.07

DCGT-21.51-UEU-DUP25GT/ DCGT-070204-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

HP-High Performance 7° ISO Insert

General

High Temp and Super Alloys,Multi Materials

(Pack of 5)

ANSI(Inch)

0.137 Inch

0.093 Inch

0.250 Inch

0.275 Inch

0.015 Inch

0.0015 Pounds

0.015 Pounds

0.004 Inch

0.079 Inch

0.002 Inch

0.012 Inch

53

1723

ISO(Metric)

3.500 mm

2.380 mm

6.350 mm

7.000 mm

0.400 mm

0.700 Grams

7.000 Grams

0.100 mm

2.000 mm

0.050 mm

0.300 mm

16

522

55° Diamond

Neutral

DCGT-21.51-UEU

DUP25GT

UEU

The DUP25GT grade, has hard & impact resistant substrate with PVD TiAlN Coating, for General Turning Application of High Temp Super Alloys, Ferrous and non Ferrous Materials, at Medium SFM (Vc) for Light interrupted Cut. Wet or Dry Working Condition

PVD TiAlN Coating, titanium aluminum nitride coating increases the stability of the cutting edges of the insert, For General Turning Application of High Temp Super Alloys, Ferrous and non Ferrous Materials, at Medium SFM (Vc)

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

2

Carbide