Catalogs

VBMT-332-PEF-DPC15HT/ VBMT-160408-PEF-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Product Information

VBMT-332-PEF-DPC15HT

VBMT-160408-PEF-DPC15HT

5° Positive

73310171921

$16.80

VBMT-332-PEF-DPC15HT/ VBMT-160408-PEF-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance 7° ISO Insert

Finishing

Stainless Steel,Carbon & Alloy Steel,Cast Iron

(Pack of 5)

ANSI(Inch)

0.078 Inch

0.187 Inch

0.375 Inch

0.629 Inch

0.031 Inch

0.0075 Pounds

0.075 Pounds

0.002 Inch

0.039 Inch

0.002 Inch

0.008 Inch

684

1140

ISO(Metric)

2.000 mm

4.760 mm

9.530 mm

16.000 mm

0.800 mm

3.500 Grams

35.000 Grams

0.050 mm

1.000 mm

0.050 mm

0.200 mm

207

346

35° Diamond

Neutral

VBMT-332-PEF

DPC15HT

PEF

The DPC15HT grade, has a hard, high wear and abrasive resistant substrate with a CVD Multi Layer of Alumina, Titanium Carbonitride Coating, (Al2O3/TiCN/Al2O3/TiCN). High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. To cut Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron at High SFM (Vc) Brittle! Not for interrupted Cut

CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron

Hole, 1 Sided Chipbreaker 40°-60° ISO Countersink

2

Carbide