Catalogs

WNMG-431-UEM-DPC15HT/ WNMG-080404-UEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

Product Information

WNMG-431-UEM-DPC15HT

WNMG-080404-UEM-DPC15HT

0° Negative

73310169867

$11.47

WNMG-431-UEM-DPC15HT/ WNMG-080404-UEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance Negative Turning Insert

Medium

Stainless Steel,Carbon & Alloy Steel,Cast Iron

(Pack of 5)

ANSI(Inch)

0.078 Inch

0.187 Inch

0.500 Inch

0.314 Inch

0.015 Inch

0.0065 Pounds

0.065 Pounds

0.016 Inch

0.079 Inch

0.004 Inch

0.008 Inch

342

1616

ISO(Metric)

2.000 mm

4.760 mm

12.700 mm

8.000 mm

0.400 mm

3.100 Grams

31.000 Grams

0.400 mm

2.000 mm

0.100 mm

0.200 mm

104

490

80° Trigon

Neutral

WNMG-431-UEM

DPC15HT

UEM

The DPC15HT grade, has a hard, high wear and abrasive resistant substrate with a CVD Multi Layer of Alumina, Titanium Carbonitride Coating, (Al2O3/TiCN/Al2O3/TiCN). High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. To cut Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron at High SFM (Vc) Brittle! Not for interrupted Cut

CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron

Hole, 2 Sided Chipbreaker

6

Carbide