Catalogs

DNMG-332-UEM-DPC15HT/ DNMG-110408-UEM-DPC15HT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

Product Information

DNMG-332-UEM-DPC15HT

DNMG-110408-UEM-DPC15HT

0° Negative

73310169840

$10.77

DNMG-332-UEM-DPC15HT/ DNMG-110408-UEM-DPC15HT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

HP-High Performance Negative Turning Insert

Medium

Stainless Steel,Carbon & Alloy Steel,Cast Iron

(Pack of 5)

ANSI(Inch)

0.216 Inch

0.187 Inch

0.375 Inch

0.433 Inch

0.031 Inch

0.0035 Pounds

0.035 Pounds

0.016 Inch

0.079 Inch

0.004 Inch

0.008 Inch

342

1616

ISO(Metric)

5.500 mm

4.760 mm

9.530 mm

11.000 mm

0.800 mm

1.700 Grams

17.000 Grams

0.400 mm

2.000 mm

0.100 mm

0.200 mm

104

490

55° Diamond

Neutral

DNMG-332-UEM

DPC15HT

UEM

The DPC15HT grade, has a hard, high wear and abrasive resistant substrate with a CVD Multi Layer of Alumina, Titanium Carbonitride Coating, (Al2O3/TiCN/Al2O3/TiCN). High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. To cut Carbon Steel, Alloy Steel, Stainless Steel and Cast Iron at High SFM (Vc) Brittle! Not for interrupted Cut

CVD, Multi Layer of Alumina, Titanium Carbonitride Coating , for High speed turning of Carbon and Alloy Steel, Stainless Steel and Cast Iron

Hole, 2 Sided Chipbreaker

4

Carbide