Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
WCGT-32.52-UEU-DUP15VT

WCGT-32.52-UEU-DUP15VT/ WCGT-06T308-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.52-UEU-DUP25GT

WCGT-32.52-UEU-DUP25GT/ WCGT-06T308-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

WCGT-32.52-UEU-DUP35RT

WCGT-32.52-UEU-DUP35RT/ WCGT-06T308-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WCGT-431-NFU-DNU10GT

WCGT-431-NFU-DNU10GT/ WCGT-080404-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-431-NFU-DNX10UT

WCGT-431-NFU-DNX10UT/ WCGT-080404-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-432-NFU-DNU10GT

WCGT-432-NFU-DNU10GT/ WCGT-080408-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-432-NFU-DNX10UT

WCGT-432-NFU-DNX10UT/ WCGT-080408-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCMT-1.21.20.2-PEF-DPC25UT

WCMT-1.21.20.2-PEF-DPC25UT/ WCMT-06T101-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

WNGG-431-SEF-DNU10GT

WNGG-431-SEF-DNU10GT/ WNGG-080404-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WNGG-431-SEF-DUP15VT

WNGG-431-SEF-DUP15VT/ WNGG-080404-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WNGG-431-SEF-DUP35RT

WNGG-431-SEF-DUP35RT/ WNGG-080404-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WNGG-431-SEM-DNU10GT

WNGG-431-SEM-DNU10GT/ WNGG-080404-SEM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

WNGG-431-SEM-DUP15VT

WNGG-431-SEM-DUP15VT/ WNGG-080404-SEM-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

WNGG-431-SEM-DUP25GT

WNGG-431-SEM-DUP25GT/ WNGG-080404-SEM-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

WNGG-431-SEM-DUP35RT

WNGG-431-SEM-DUP35RT/ WNGG-080404-SEM-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

WNGG-431-SFM-DNU10GT

WNGG-431-SFM-DNU10GT/ WNGG-080404-SFM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

WNGG-432-SEF-DNU10GT

WNGG-432-SEF-DNU10GT/ WNGG-080408-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WNGG-432-SEF-DUP15VT

WNGG-432-SEF-DUP15VT/ WNGG-080408-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WNGG-432-SEF-DUP35RT

WNGG-432-SEF-DUP35RT/ WNGG-080408-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WNGG-432-SEM-DNU10GT

WNGG-432-SEM-DNU10GT/ WNGG-080408-SEM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

Total: 1466