Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
CCMT-32.52-KEM-DKC15RT

CCMT-32.52-KEM-DKC15RT/ CCMT-09T308-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCMT-32.52-MEM-DMC30UT

CCMT-32.52-MEM-DMC30UT/ CCMT-09T308-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCMT-32.52-PEF-DPC15HT

CCMT-32.52-PEF-DPC15HT/ CCMT-09T308-PEF-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCMT-32.52-PEF-DPC25UT

CCMT-32.52-PEF-DPC25UT/ CCMT-09T308-PEF-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCMT-32.52-PEM-DPC15HT

CCMT-32.52-PEM-DPC15HT/ CCMT-09T308-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-32.52-PEM-DPC25UT

CCMT-32.52-PEM-DPC25UT/ CCMT-09T308-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCMT-431-MEM-DMC30UT

CCMT-431-MEM-DMC30UT/ CCMT-120404-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCMT-431-PEF-DPC15HT

CCMT-431-PEF-DPC15HT/ CCMT-120404-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCMT-431-PEF-DPC25UT

CCMT-431-PEF-DPC25UT/ CCMT-120404-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCMT-431-PEM-DPC15HT

CCMT-431-PEM-DPC15HT/ CCMT-120404-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-431-PEM-DPC25UT

CCMT-431-PEM-DPC25UT/ CCMT-120404-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCMT-432-KEM-DKC15RT

CCMT-432-KEM-DKC15RT/ CCMT-120408-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCMT-432-PEM-DPC15HT

CCMT-432-PEM-DPC15HT/ CCMT-120408-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-432-PEM-DPC25UT

CCMT-432-PEM-DPC25UT/ CCMT-120408-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCMW-32.51-KEU-DKU10HT

CCMW-32.51-KEU-DKU10HT/ CCMW-09T304-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMW-32.51-KEU-DUP15VT

CCMW-32.51-KEU-DUP15VT/ CCMW-09T304-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMW-431-KEU-DKU10HT

CCMW-431-KEU-DKU10HT/ CCMW-120404-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMW-431-KEU-DUP15VT

CCMW-431-KEU-DUP15VT/ CCMW-120404-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMW-432-KEU-DKU10HT

CCMW-432-KEU-DKU10HT/ CCMW-120408-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMW-432-KEU-DUP15VT

CCMW-432-KEU-DUP15VT/ CCMW-120408-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

Total: 1466