Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
WCGT-1.51.50.2-UEU-DUP25GT

WCGT-1.51.50.2-UEU-DUP25GT/ WCGT-S30201-UEU-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

WCGT-1.51.50.2-UEU-DUP35RT

WCGT-1.51.50.2-UEU-DUP35RT/ WCGT-S30201-UEU-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WCGT-1.51.50.5-UEU-DNU10GT

WCGT-1.51.50.5-UEU-DNU10GT/ WCGT-S30202-UEU-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-1.51.50.5-UEU-DUP15VT

WCGT-1.51.50.5-UEU-DUP15VT/ WCGT-S30202-UEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-1.51.50.5-UEU-DUP25GT

WCGT-1.51.50.5-UEU-DUP25GT/ WCGT-S30202-UEU-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

WCGT-1.51.50.5-UEU-DUP35RT

WCGT-1.51.50.5-UEU-DUP35RT/ WCGT-S30202-UEU-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WCGT-21.51-UEU-DNU10GT

WCGT-21.51-UEU-DNU10GT/ WCGT-040204-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-21.51-UEU-DUP15VT

WCGT-21.51-UEU-DUP15VT/ WCGT-040204-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-21.51-UEU-DUP35RT

WCGT-21.51-UEU-DUP35RT/ WCGT-040204-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WCGT-32.50.5-NFU-DNU10GT

WCGT-32.50.5-NFU-DNU10GT/ WCGT-06T302-NFU-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.50.5-NFU-DNX10UT

WCGT-32.50.5-NFU-DNX10UT/ WCGT-06T302-NFU-DNX10UT, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.51-NFU-DNU10GT

WCGT-32.51-NFU-DNU10GT/ WCGT-06T304-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.51-NFU-DNX10UT

WCGT-32.51-NFU-DNX10UT/ WCGT-06T304-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.51-UEU-DNU10GT

WCGT-32.51-UEU-DNU10GT/ WCGT-06T304-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.51-UEU-DUP15VT

WCGT-32.51-UEU-DUP15VT/ WCGT-06T304-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.51-UEU-DUP25GT

WCGT-32.51-UEU-DUP25GT/ WCGT-06T304-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

WCGT-32.51-UEU-DUP35RT

WCGT-32.51-UEU-DUP35RT/ WCGT-06T304-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

WCGT-32.52-NFU-DNU10GT

WCGT-32.52-NFU-DNU10GT/ WCGT-06T308-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.52-NFU-DNX10UT

WCGT-32.52-NFU-DNX10UT/ WCGT-06T308-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

WCGT-32.52-UEU-DNU10GT

WCGT-32.52-UEU-DNU10GT/ WCGT-06T308-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Total: 1466