Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
VCGT-332-UEU-DNU10GT

VCGT-332-UEU-DNU10GT/ VCGT-160408-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

VCGT-332-UEU-DUP15VT

VCGT-332-UEU-DUP15VT/ VCGT-160408-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

VCGT-332-UEU-DUP25GT

VCGT-332-UEU-DUP25GT/ VCGT-160408-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

VCGT-332-UEU-DUP35RT

VCGT-332-UEU-DUP35RT/ VCGT-160408-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

VCGT-333-NFU-DNU10GT

VCGT-333-NFU-DNU10GT/ VCGT-160412-NFU-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

VCGT-333-NFU-DNX10UT

VCGT-333-NFU-DNX10UT/ VCGT-160412-NFU-DNX10UT, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

VCGT-448-NFU-DNU10GT

VCGT-448-NFU-DNU10GT/ VCGT-220532-NFU-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

VCGT-448-NFU-DNX10UT

VCGT-448-NFU-DNX10UT/ VCGT-220532-NFU-DNX10UT, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

VCGW-221-KEU-DKU10HT

VCGW-221-KEU-DKU10HT/ VCGW-110304-KEU-DKU10HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

VCGW-221-KEU-DUP15VT

VCGW-221-KEU-DUP15VT/ VCGW-110304-KEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

VCGW-221-KEU-DUP35RT

VCGW-221-KEU-DUP35RT/ VCGW-110304-KEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

VCGW-331-KEU-DKU10HT

VCGW-331-KEU-DKU10HT/ VCGW-160404-KEU-DKU10HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

VCGW-331-KEU-DUP15VT

VCGW-331-KEU-DUP15VT/ VCGW-160404-KEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

VCGW-331-KEU-DUP35RT

VCGW-331-KEU-DUP35RT/ VCGW-160404-KEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

VCGW-332-KEU-DKU10HT

VCGW-332-KEU-DKU10HT/ VCGW-160408-KEU-DKU10HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

VCGW-332-KEU-DUP15VT

VCGW-332-KEU-DUP15VT/ VCGW-160408-KEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

VCGW-332-KEU-DUP35RT

VCGW-332-KEU-DUP35RT/ VCGW-160408-KEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

VCGX-220.5-UEFL-DNU10GT

VCGX-220.5-UEFL-DNU10GT/ VCGX-110302-UEFL-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

VCGX-220.5-UEFL-DUP15VT

VCGX-220.5-UEFL-DUP15VT/ VCGX-110302-UEFL-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

VCGX-220.5-UEFL-DUP25GT

VCGX-220.5-UEFL-DUP25GT/ VCGX-110302-UEFL-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Total: 1466