Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
CCGX-32.52-UEFR-DNU10GT

CCGX-32.52-UEFR-DNU10GT/ CCGX-09T308-UEFR-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGX-32.52-UEFR-DUP15VT

CCGX-32.52-UEFR-DUP15VT/ CCGX-09T308-UEFR-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGX-32.52-UEFR-DUP25GT

CCGX-32.52-UEFR-DUP25GT/ CCGX-09T308-UEFR-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCGX-32.52-UEFR-DUP35RT

CCGX-32.52-UEFR-DUP35RT/ CCGX-09T308-UEFR-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

CCMT-21.50.5-PEM-DPC15HT

CCMT-21.50.5-PEM-DPC15HT/ CCMT-060202-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-21.50.5-PEM-DPC25UT

CCMT-21.50.5-PEM-DPC25UT/ CCMT-060202-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCMT-21.51-PEF-DPC15HT

CCMT-21.51-PEF-DPC15HT/ CCMT-060204-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCMT-21.51-PEF-DPC25UT

CCMT-21.51-PEF-DPC25UT/ CCMT-060204-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCMT-21.51-PEM-DPC15HT

CCMT-21.51-PEM-DPC15HT/ CCMT-060204-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-21.51-PEM-DPC25UT

CCMT-21.51-PEM-DPC25UT/ CCMT-060204-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCMT-21.52-PEF-DPC15HT

CCMT-21.52-PEF-DPC15HT/ CCMT-060208-PEF-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCMT-21.52-PEF-DPC25UT

CCMT-21.52-PEF-DPC25UT/ CCMT-060208-PEF-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCMT-21.52-PEM-DPC15HT

CCMT-21.52-PEM-DPC15HT/ CCMT-060208-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-21.52-PEM-DPC25UT

CCMT-21.52-PEM-DPC25UT/ CCMT-060208-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCMT-32.51-KEM-DKC15RT

CCMT-32.51-KEM-DKC15RT/ CCMT-09T304-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCMT-32.51-MEM-DMC30UT

CCMT-32.51-MEM-DMC30UT/ CCMT-09T304-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCMT-32.51-PEF-DPC15HT

CCMT-32.51-PEF-DPC15HT/ CCMT-09T304-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCMT-32.51-PEF-DPC25UT

CCMT-32.51-PEF-DPC25UT/ CCMT-09T304-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCMT-32.51-PEM-DPC15HT

CCMT-32.51-PEM-DPC15HT/ CCMT-09T304-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCMT-32.51-PEM-DPC25UT

CCMT-32.51-PEM-DPC25UT/ CCMT-09T304-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

Total: 1466