Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
TPGX-32.52-UEFL-DUP35RT

TPGX-32.52-UEFL-DUP35RT/ TPGX-16T308-UEFL-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

TPGX-32.52-UEFR-DNU10GT

TPGX-32.52-UEFR-DNU10GT/ TPGX-16T308-UEFR-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TPGX-32.52-UEFR-DUP15VT

TPGX-32.52-UEFR-DUP15VT/ TPGX-16T308-UEFR-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TPGX-32.52-UEFR-DUP25GT

TPGX-32.52-UEFR-DUP25GT/ TPGX-16T308-UEFR-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPGX-32.52-UEFR-DUP35RT

TPGX-32.52-UEFR-DUP35RT/ TPGX-16T308-UEFR-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

TPHT-32.51-UEN-DNP25GT

TPHT-32.51-UEN-DNP25GT/ TPHT-16T304-UEN-DNP25GT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPHT-32.51-UEN-DNU25GT

TPHT-32.51-UEN-DNU25GT/ TPHT-16T304-UEN-DNU25GT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPHT-32.51-UEN-DPP30GT

TPHT-32.51-UEN-DPP30GT/ TPHT-16T304-UEN-DPP30GT, Wear & Impact Resistant, Medium/High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPHT-32.52-UEN-DNP25GT

TPHT-32.52-UEN-DNP25GT/ TPHT-16T308-UEN-DNP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPHT-32.52-UEN-DNU25GT

TPHT-32.52-UEN-DNU25GT/ TPHT-16T308-UEN-DNU25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPHT-32.52-UEN-DPP30GT

TPHT-32.52-UEN-DPP30GT/ TPHT-16T308-UEN-DPP30GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium/High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-221-PEU-DPC15HT

TPMR-221-PEU-DPC15HT/ TPMR-110304-PEU-DPC15HT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-221-PEU-DPC25UT

TPMR-221-PEU-DPC25UT/ TPMR-110304-PEU-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-221-PEU-DPC35RT

TPMR-221-PEU-DPC35RT/ TPMR-110304-PEU-DPC35RT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-222-PEU-DPC15HT

TPMR-222-PEU-DPC15HT/ TPMR-110308-PEU-DPC15HT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-222-PEU-DPC25UT

TPMR-222-PEU-DPC25UT/ TPMR-110308-UEN-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-222-PEU-DPC35RT

TPMR-222-PEU-DPC35RT/ TPMR-110308-PEU-DPC35RT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-321-PEU-DPC15HT

TPMR-321-PEU-DPC15HT/ TPMR-160304-PEU-DPC15HT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-321-PEU-DPC25UT

TPMR-321-PEU-DPC25UT/ TPMR-160304-PEU-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TPMR-321-PEU-DPC35RT

TPMR-321-PEU-DPC35RT/ TPMR-160304-PEU-DPC35RT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Total: 1466