Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
TCMT-21.51-MEM-DMC30UT

TCMT-21.51-MEM-DMC30UT/ TCMT-110204-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

TCMT-21.51-PEF-DPC15HT

TCMT-21.51-PEF-DPC15HT/ TCMT-110204-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TCMT-21.51-PEF-DPC25UT

TCMT-21.51-PEF-DPC25UT/ TCMT-110204-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TCMT-21.51-PEM-DPC15HT

TCMT-21.51-PEM-DPC15HT/ TCMT-110204-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMT-21.51-PEM-DPC25UT

TCMT-21.51-PEM-DPC25UT/ TCMT-110204-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

TCMT-21.52-MEM-DMC30UT

TCMT-21.52-MEM-DMC30UT/ TCMT-110208-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

TCMT-21.52-PEM-DPC15HT

TCMT-21.52-PEM-DPC15HT/ TCMT-110208-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMT-21.52-PEM-DPC25UT

TCMT-21.52-PEM-DPC25UT/ TCMT-110208-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

TCMT-32.51-MEM-DMC30UT

TCMT-32.51-MEM-DMC30UT/ TCMT-16T304-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

TCMT-32.51-PEM-DPC15HT

TCMT-32.51-PEM-DPC15HT/ TCMT-16T304-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMT-32.51-PEM-DPC25UT

TCMT-32.51-PEM-DPC25UT/ TCMT-16T304-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

TCMT-32.52-MEM-DMC30UT

TCMT-32.52-MEM-DMC30UT/ TCMT-16T308-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

TCMT-32.52-PEM-DPC15HT

TCMT-32.52-PEM-DPC15HT/ TCMT-16T308-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMT-32.52-PEM-DPC25UT

TCMT-32.52-PEM-DPC25UT/ TCMT-16T308-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

TCMW-21.51-KEU-DKU10HT

TCMW-21.51-KEU-DKU10HT/ TCMW-110204-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMW-21.51-KEU-DUP15VT

TCMW-21.51-KEU-DUP15VT/ TCMW-110204-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMW-32.51-KEU-DKU10HT

TCMW-32.51-KEU-DKU10HT/ TCMW-16T304-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TCMW-32.51-KEU-DUP15VT

TCMW-32.51-KEU-DUP15VT/ TCMW-16T304-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

TEGE-1.81.51-UEN-DNP25GT

TEGE-1.81.51-UEN-DNP25GT/ TEGE-100204-UEN-DNP25GT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TEGE-1.81.51-UEN-DNU25GT

TEGE-1.81.51-UEN-DNU25GT/ TEGE-100204-UEN-DNU25GT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Total: 1466