Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
SPG-432-UEN-DPP30GT

SPG-432-UEN-DPP30GT/ SPG-120408-UEN-DPP30GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium/High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TCGT-21.50.2-UEU-DNU10GT

TCGT-21.50.2-UEU-DNU10GT/ TCGT-110201-UEU-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TCGT-21.50.2-UEU-DUP15VT

TCGT-21.50.2-UEU-DUP15VT/ TCGT-110201-UEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TCGT-21.50.2-UEU-DUP25GT

TCGT-21.50.2-UEU-DUP25GT/ TCGT-110201-UEU-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TCGT-21.50.2-UEU-DUP35RT

TCGT-21.50.2-UEU-DUP35RT/ TCGT-110201-UEU-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

TCGT-21.51-NFU-DNU10GT

TCGT-21.51-NFU-DNU10GT/ TCGT-110204-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

TCGT-21.51-NFU-DNX10UT

TCGT-21.51-NFU-DNX10UT/ TCGT-110204-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

TCGT-21.51-UEU-DNU10GT

TCGT-21.51-UEU-DNU10GT/ TCGT-110204-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TCGT-21.51-UEU-DUP15VT

TCGT-21.51-UEU-DUP15VT/ TCGT-110204-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

TCGT-21.51-UEU-DUP25GT

TCGT-21.51-UEU-DUP25GT/ TCGT-110204-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

TCGT-21.51-UEU-DUP35RT

TCGT-21.51-UEU-DUP35RT/ TCGT-110204-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

TCGT-21.51-UEXL-DMC30UT

TCGT-21.51-UEXL-DMC30UT/ TCGT-110204-UEXL-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

TCGT-21.51-UEXL-DPC25UT

TCGT-21.51-UEXL-DPC25UT/ TCGT-110204-UEXL-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

TCGT-21.51-UEXL-DPC35RT

TCGT-21.51-UEXL-DPC35RT/ TCGT-110204-UEXL-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

TCGT-21.51-UEXR-DMC30UT

TCGT-21.51-UEXR-DMC30UT/ TCGT-110204-UEXR-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

TCGT-21.51-UEXR-DPC25UT

TCGT-21.51-UEXR-DPC25UT/ TCGT-110204-UEXR-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

TCGT-21.51-UEXR-DPC35RT

TCGT-21.51-UEXR-DPC35RT/ TCGT-110204-UEXR-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

TCGT-32.51-NFU-DNU10GT

TCGT-32.51-NFU-DNU10GT/ TCGT-16T304-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

TCGT-32.51-NFU-DNX10UT

TCGT-32.51-NFU-DNX10UT/ TCGT-16T304-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

TCGT-32.51-UEU-DNU10GT

TCGT-32.51-UEU-DNU10GT/ TCGT-16T304-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Total: 1466