Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
SCMW-32.51-KEU-DUP15VT

SCMW-32.51-KEU-DUP15VT/ SCMW-09T304-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

SCMW-431-KEU-DKU10HT

SCMW-431-KEU-DKU10HT/ SCMW-120404-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

SCMW-431-KEU-DUP15VT

SCMW-431-KEU-DUP15VT/ SCMW-120404-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

SDP-322-UEN-DNP25GT

SDP-322-UEN-DNP25GT/ SDP-090308-UEN-DNP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-322-UEN-DNU25GT

SDP-322-UEN-DNU25GT/ SDP-090308-UEN-DNU25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-322-UEN-DPP30GT

SDP-322-UEN-DPP30GT/ SDP-090308-UEN-DPP30GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium/High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-422-UEN-DNP25GT

SDP-422-UEN-DNP25GT/ SDP-120308-UEN-DNP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-422-UEN-DNU25GT

SDP-422-UEN-DNU25GT/ SDP-120308-UEN-DNU25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-422-UEN-DPP30GT

SDP-422-UEN-DPP30GT/ SDP-120308-UEN-DPP30GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium/High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-532-UEN-DNP25GT

SDP-532-UEN-DNP25GT/ SDP-150408-UEN-DNP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-532-UEN-DNU25GT

SDP-532-UEN-DNU25GT/ SDP-150408-UEN-DNU25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SDP-532-UEN-DPP30GT

SDP-532-UEN-DPP30GT/ SDP-150408-UEN-DPP30GT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium/High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SNG-322-UEN-DKU25GT

SNG-322-UEN-DKU25GT/ SNG-090308-UEN-DKU25GT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SNG-322-UEN-DUC25UT

SNG-322-UEN-DUC25UT/ SNG-090308-UEN-DUC25UT, Hard & Tough, Wear & Shock resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SNMA-432-KEU-DKC10UT

SNMA-432-KEU-DKC10UT/ SNMA-120408-KEU-DKC10UTBetter surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

SNMA-432-KEU-DKC15RT

SNMA-432-KEU-DKC15RT/ SNMA-120408-KEU-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

SNMA-433-KEU-DKC10UT

SNMA-433-KEU-DKC10UT/ SNMA-120412-KEU-DKC10UT, Higher Feed Rate, with Better Surface Finish, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

SNMA-433-KEU-DKC15RT

SNMA-433-KEU-DKC15RT/ SNMA-120412-KEU-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

SNMA-434-KEU-DKC10UT

SNMA-434-KEU-DKC10UT/ SNMA-120416-KEU-DKC10UT, Higher Feed Rate, with Better Surface Finish, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

SNMA-434-KEU-DKC15RT

SNMA-434-KEU-DKC15RT/ SNMA-120416-KEU-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

Total: 1466