Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
CCGT-433-UEXL-DMC30UT

CCGT-433-UEXL-DMC30UT/ CCGT-120412-UEXL-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCGT-433-UEXL-DPC25UT

CCGT-433-UEXL-DPC25UT/ CCGT-120412-UEXL-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCGT-433-UEXL-DPC35RT

CCGT-433-UEXL-DPC35RT/ CCGT-120412-UEXL-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGT-433-UEXR-DMC30UT

CCGT-433-UEXR-DMC30UT/ CCGT-120412-UEXR-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCGT-433-UEXR-DPC25UT

CCGT-433-UEXR-DPC25UT/ CCGT-120412-UEXR-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCGT-433-UEXR-DPC35RT

CCGT-433-UEXR-DPC35RT/ CCGT-120412-UEXR-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGW-21.51-KEU-DKU10HT

CCGW-21.51-KEU-DKU10HT/ CCGW-060204-KEU-DKU10HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCGW-21.51-KEU-DUP15VT

CCGW-21.51-KEU-DUP15VT/ CCGW-060204-KEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCGW-21.51-KEU-DUP35RT

CCGW-21.51-KEU-DUP35RT/ CCGW-060204-KEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGW-32.52-KEU-DKU10HT

CCGW-32.52-KEU-DKU10HT/ CCGW-09T308-KEU-DKU10HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCGW-32.52-KEU-DUP15VT

CCGW-32.52-KEU-DUP15VT/ CCGW-09T308-KEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CCGW-32.52-KEU-DUP35RT

CCGW-32.52-KEU-DUP35RT/ CCGW-09T308-KEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGX-21.50.5-UEFL-DNU10GT

CCGX-21.50.5-UEFL-DNU10GT/ CCGX-060202-UEFL-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGX-21.50.5-UEFL-DUP15VT

CCGX-21.50.5-UEFL-DUP15VT/ CCGX-060202-UEFL-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGX-21.50.5-UEFL-DUP25GT

CCGX-21.50.5-UEFL-DUP25GT/ CCGX-060202-UEFL-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCGX-21.50.5-UEFL-DUP35RT

CCGX-21.50.5-UEFL-DUP35RT/ CCGX-060202-UEFL-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

CCGX-21.50.5-UEFR-DNU10GT

CCGX-21.50.5-UEFR-DNU10GT/ CCGX-060202-UEFR-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGX-21.50.5-UEFR-DUP15VT

CCGX-21.50.5-UEFR-DUP15VT/ CCGX-060202-UEFR-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGX-21.50.5-UEFR-DUP25GT

CCGX-21.50.5-UEFR-DUP25GT/ CCGX-060202-UEFR-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCGX-21.50.5-UEFR-DUP35RT

CCGX-21.50.5-UEFR-DUP35RT/ CCGX-060202-UEFR-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

Total: 1466