Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
SCGT-431-UEU-DUP15VT

SCGT-431-UEU-DUP15VT/ SCGT-120404-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

SCGT-431-UEU-DUP25GT

SCGT-431-UEU-DUP25GT/ SCGT-120404-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SCGT-431-UEU-DUP35RT

SCGT-431-UEU-DUP35RT/ SCGT-120404-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

SCGT-432-NFU-DNU10GT

SCGT-432-NFU-DNU10GT/ SCGT-120408-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

SCGT-432-NFU-DNX10UT

SCGT-432-NFU-DNX10UT/ SCGT-120408-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

SCGT-432-UEU-DNU10GT

SCGT-432-UEU-DNU10GT/ SCGT-120408-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

SCGT-432-UEU-DUP15VT

SCGT-432-UEU-DUP15VT/ SCGT-120408-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

SCGT-432-UEU-DUP25GT

SCGT-432-UEU-DUP25GT/ SCGT-120408-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SCGT-432-UEU-DUP35RT

SCGT-432-UEU-DUP35RT/ SCGT-120408-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

SCMT-32.51-PEF-DPC15HT

SCMT-32.51-PEF-DPC15HT/ SCMT-09T304-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

SCMT-32.51-PEF-DPC25UT

SCMT-32.51-PEF-DPC25UT/ SCMT-09T304-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

SCMT-32.52-PEM-DPC15HT

SCMT-32.52-PEM-DPC15HT/ SCMT-09T308-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

SCMT-32.52-PEM-DPC25UT

SCMT-32.52-PEM-DPC25UT/ SCMT-09T308-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

SCMT-432-KEM-DKC15RT

SCMT-432-KEM-DKC15RT/ SCMT-120408-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

SCMT-432-MEM-DMC30UT

SCMT-432-MEM-DMC30UT/ SCMT-120408-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

SCMT-432-PEM-DPC15HT

SCMT-432-PEM-DPC15HT/ SCMT-120408-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

SCMT-432-PEM-DPC25UT

SCMT-432-PEM-DPC25UT/ SCMT-120408-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

SCMT-433-PEM-DPC15HT

SCMT-433-PEM-DPC15HT/ SCMT-120412-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

SCMT-433-PEM-DPC25UT

SCMT-433-PEM-DPC25UT/ SCMT-120412-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

SCMW-32.51-KEU-DKU10HT

SCMW-32.51-KEU-DKU10HT/ SCMW-09T304-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

Total: 1466