Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
DNMG-433-SEM-DNU10GT

DNMG-433-SEM-DNU10GT/ DNMG-150412-SEM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-433-SEM-DUP15VT

DNMG-433-SEM-DUP15VT/ DNMG-150412-SEM-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-433-SEM-DUP25GT

DNMG-433-SEM-DUP25GT/ DNMG-150412-SEM-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-433-SEM-DUP35RT

DNMG-433-SEM-DUP35RT/ DNMG-150412-SEM-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-433-SFM-DNU10GT

DNMG-433-SFM-DNU10GT/ DNMG-150412-SFM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-441-MEF-DMC30UT

DNMG-441-MEF-DMC30UT/ DNMG-150604-MEF-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Medium interrupted Cut

DNMG-441-PEF-DPC15HT

DNMG-441-PEF-DPC15HT/ DNMG-150604-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNMG-441-PEF-DPC25UT

DNMG-441-PEF-DPC25UT/ DNMG-150604-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DNMG-441-SEM-DNU10GT

DNMG-441-SEM-DNU10GT/ DNMG-150604-SEM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-441-SEM-DUP15VT

DNMG-441-SEM-DUP15VT/ DNMG-150604-SEM-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-441-SEM-DUP25GT

DNMG-441-SEM-DUP25GT/ DNMG-150604-SEM-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-441-SEM-DUP35RT

DNMG-441-SEM-DUP35RT/ DNMG-150604-SEM-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-441-SFM-DNU10GT

DNMG-441-SFM-DNU10GT/ DNMG-150604-SFM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-441-UEM-DPC15HT

DNMG-441-UEM-DPC15HT/ DNMG-150604-UEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-441-UEM-DPC25UT

DNMG-441-UEM-DPC25UT/ DNMG-150604-UEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-441-UEM-DPC35RT

DNMG-441-UEM-DPC35RT/ DNMG-150604-UEM-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-442-KER-DKC10UT

DNMG-442-KER-DKC10UT/ DNMG-150608-KER-DKC10UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Large Depth of Cut and High Feed per Rev, Light interrupted Cut

DNMG-442-KER-DKC15RT

DNMG-442-KER-DKC15RT/ DNMG-150608-KER-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Large Depth of Cut and High Feed per Rev, For interrupted Cut

DNMG-442-MEF-DMC30UT

DNMG-442-MEF-DMC30UT/ DNMG-150608-MEF-DMC30UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Medium interrupted Cut

DNMG-442-MEM-DMC30UT

DNMG-442-MEM-DMC30UT/ DNMG-150608-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

Total: 1466