Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
DNMG-432-PEM-DPC25UT

DNMG-432-PEM-DPC25UT/ DNMG-150408-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-432-PEM-DPC35RT

DNMG-432-PEM-DPC35RT/ DNMG-150408-PEM-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-432-PER-DPC15HT

DNMG-432-PER-DPC15HT/ DNMG-150408-PER-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Large Depth of Cut and High Feed per Rev, Brittle! Not for interrupted Cut

DNMG-432-PER-DPC25UT

DNMG-432-PER-DPC25UT/ DNMG-150408-PER-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Large Depth of Cut and High Feed per Rev, Light interrupted Cut

DNMG-432-PER-DPC35RT

DNMG-432-PER-DPC35RT/ DNMG-150408-PER-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Large Depth of Cut and High Feed per Rev, For interrupted Cut

DNMG-432-SEM-DNU10GT

DNMG-432-SEM-DNU10GT/ DNMG-150408-SEM-DNU10GT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-432-SEM-DUP15VT

DNMG-432-SEM-DUP15VT/ DNMG-150408-SEM-DUP15VT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cu

DNMG-432-SEM-DUP25GT

DNMG-432-SEM-DUP25GT/ DNMG-150408-SEM-DUP25GT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-432-SEM-DUP35RT

DNMG-432-SEM-DUP35RT/ DNMG-150408-SEM-DUP35RT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-432-SFM-DNU10GT

DNMG-432-SFM-DNU10GT/ DNMG-150408-SFM-DNU10GT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-432-UEM-DPC25UT

DNMG-432-UEM-DPC25UT/ DNMG-150408-UEM-DPC25UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-432-UGN-DUC25UT

DNMG-432-UGN-DUC25UT/ DNMG-150408-UGN-DUC25UT, Hard & Tough, Wear & Shock resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-433-KER-DKC10UT

DNMG-433-KER-DKC10UT/ DNMG-150412-KER-DKC10UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Large Depth of Cut and High Feed per Rev, Light interrupted Cut

DNMG-433-KER-DKC15RT

DNMG-433-KER-DKC15RT/ DNMG-150412-KER-DKC15RT, Higher Feed Rate, with Better surface Finish in stable working condition, Tough & Impact Resistant, Low Cutting Speed, Large Depth of Cut and High Feed per Rev, For interrupted Cut

DNMG-433-PEM-DPC15HT

DNMG-433-PEM-DPC15HT/ DNMG-150412-PEM-DPC15HT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-433-PEM-DPC25UT

DNMG-433-PEM-DPC25UT/ DNMG-150412-PEM-DPC25UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-433-PEM-DPC35RT

DNMG-433-PEM-DPC35RT/ DNMG-150412-PEM-DPC35RTBetter surface Finish in stable working condition, Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-433-PER-DPC15HT

DNMG-433-PER-DPC15HT/ DNMG-150412-PER-DPC15HTBetter surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Large Depth of Cut and High Feed per Rev, Brittle! Not for interrupted Cut

DNMG-433-PER-DPC25UT

DNMG-433-PER-DPC25UT/ DNMG-150412-PER-DPC25UTBetter surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Large Depth of Cut and High Feed per Rev, Light interrupted Cut

DNMG-433-PER-DPC35RT

DNMG-433-PER-DPC35RT/ DNMG-150412-PER-DPC35RT, Higher Feed Rate, with Better surface Finish in stable working condition, Tough & Impact Resistant, Low Cutting Speed, Large Depth of Cut and High Feed per Rev, For interrupted Cut

Total: 1466