Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
DNGG-441-SEF-DUP35RT

DNGG-441-SEF-DUP35RT/ DNGG-150604-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DNGG-442-SEF-DNU10GT

DNGG-442-SEF-DNU10GT/ DNGG-150608-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-442-SEF-DUP15VT

DNGG-442-SEF-DUP15VT/ DNGG-150608-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-442-SEF-DUP35RT

DNGG-442-SEF-DUP35RT/ DNGG-150608-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DNGG-443-SEF-DNU10GT

DNGG-443-SEF-DNU10GT/ DNGG-150612-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-443-SEF-DUP15VT

DNGG-443-SEF-DUP15VT/ DNGG-150612-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-443-SEF-DUP35RT

DNGG-443-SEF-DUP35RT/ DNGG-150612-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DNMA-442-KEU-DKC15RT

DNMA-442-KEU-DKC15RT/ DNMA-150608-KEU-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMA-443-KEU-DKC15RT

DNMA-443-KEU-DKC15RT/ DNMA-150612-KEU-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-331-KEF-DKC05HT

DNMG-331-KEF-DKC05HT/ DNMG-110404-KEF-DKC05HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNMG-331-KEF-DKC10UT

DNMG-331-KEF-DKC10UT/ DNMG-110404-KEF-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DNMG-331-MEF-DMC30UT

DNMG-331-MEF-DMC30UT/ DNMG-110404-MEF-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Medium interrupted Cut

DNMG-331-PEF-DPC15HT

DNMG-331-PEF-DPC15HT/ DNMG-110404-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNMG-331-PEF-DPC25UT

DNMG-331-PEF-DPC25UT/ DNMG-110404-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DNMG-331-UEM-DPC15HT

DNMG-331-UEM-DPC15HT/ DNMG-110404-UEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNMG-331-UEM-DPC25UT

DNMG-331-UEM-DPC25UT/ DNMG-110404-UEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DNMG-331-UEM-DPC35RT

DNMG-331-UEM-DPC35RT/ DNMG-110404-UEM-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DNMG-332-KEF-DKC05HT

DNMG-332-KEF-DKC05HT/ DNMG-110408-KEF-DKC05HT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNMG-332-KEF-DKC10UT

DNMG-332-KEF-DKC10UT/ DNMG-110408-KEF-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DNMG-332-MEM-DMC30UT

DNMG-332-MEM-DMC30UT/ DNMG-110408-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

Total: 1466