Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
DCMT-32.52-KEM-DKC10UT

DCMT-32.52-KEM-DKC10UT/ DCMT-11T308-KEM-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCMT-32.52-KEM-DKC15RT

DCMT-32.52-KEM-DKC15RT/ DCMT-11T308-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DCMT-32.52-MEM-DMC30UT

DCMT-32.52-MEM-DMC30UT/ DCMT-11T308-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

DCMT-32.52-PEM-DPC15HT

DCMT-32.52-PEM-DPC15HT/ DCMT-11T308-PEM-DPC15HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCMT-32.52-PEM-DPC25UT

DCMT-32.52-PEM-DPC25UT/ DCMT-11T308-PEM-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCMW-32.51-KEU-DKU10HT

DCMW-32.51-KEU-DKU10HT/ DCMW-11T304-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCMW-32.51-KEU-DUP15VT

DCMW-32.51-KEU-DUP15VT/ DCMW-11T304-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCMW-32.52-KEU-DKU10HT

DCMW-32.52-KEU-DKU10HT/ DCMW-11T308-KEU-DKU10HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCMW-32.52-KEU-DUP15VT

DCMW-32.52-KEU-DUP15VT/ DCMW-11T308-KEU-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DNGG-431-SEF-DNU10GT

DNGG-431-SEF-DNU10GT/ DNGG-150404-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-431-SEF-DUP15VT

DNGG-431-SEF-DUP15VT/ DNGG-150404-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-431-SEF-DUP35RT

DNGG-431-SEF-DUP35RT/ DNGG-150404-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DNGG-432-SEF-DNU10GT

DNGG-432-SEF-DNU10GT/ DNGG-150408-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-432-SEF-DUP15VT

DNGG-432-SEF-DUP15VT/ DNGG-150408-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-432-SEF-DUP35RT

DNGG-432-SEF-DUP35RT/ DNGG-150408-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DNGG-433-SEF-DNU10GT

DNGG-433-SEF-DNU10GT/ DNGG-150412-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-433-SEF-DUP15VT

DNGG-433-SEF-DUP15VT/ DNGG-150412-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-433-SEF-DUP35RT

DNGG-433-SEF-DUP35RT/ DNGG-150412-SEF-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DNGG-441-SEF-DNU10GT

DNGG-441-SEF-DNU10GT/ DNGG-150604-SEF-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DNGG-441-SEF-DUP15VT

DNGG-441-SEF-DUP15VT/ DNGG-150604-SEF-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

Total: 1466