Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
DCGX-32.52-UEFL-DUP35RT

DCGX-32.52-UEFL-DUP35RT/ DCGX-11T308-UEFL-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DCGX-32.52-UEFR-DNU10GT

DCGX-32.52-UEFR-DNU10GT/ DCGX-11T308-UEFR-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGX-32.52-UEFR-DUP15VT

DCGX-32.52-UEFR-DUP15VT/ DCGX-11T308-UEFR-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGX-32.52-UEFR-DUP25GT

DCGX-32.52-UEFR-DUP25GT/ DCGX-11T308-UEFR-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DCGX-32.52-UEFR-DUP35RT

DCGX-32.52-UEFR-DUP35RT/ DCGX-11T308-UEFR-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DCMT-21.51-KEM-DKC10UT

DCMT-21.51-KEM-DKC10UT/ DCMT-070204-KEM-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCMT-21.51-KEM-DKC15RT

DCMT-21.51-KEM-DKC15RT/ DCMT-070204-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DCMT-21.51-PEF-DPC15HT

DCMT-21.51-PEF-DPC15HT/ DCMT-070204-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCMT-21.51-PEF-DPC25UT

DCMT-21.51-PEF-DPC25UT/ DCMT-070204-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DCMT-21.51-PEM-DPC15HT

DCMT-21.51-PEM-DPC15HT/ DCMT-070204-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCMT-21.51-PEM-DPC25UT

DCMT-21.51-PEM-DPC25UT/ DCMT-070204-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCMT-21.52-KEM-DKC10UT

DCMT-21.52-KEM-DKC10UT/ DCMT-070208-KEM-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCMT-21.52-KEM-DKC15RT

DCMT-21.52-KEM-DKC15RT/ DCMT-070208-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DCMT-32.51-KEM-DKC10UT

DCMT-32.51-KEM-DKC10UT/ DCMT-11T304-KEM-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCMT-32.51-KEM-DKC15RT

DCMT-32.51-KEM-DKC15RT/ DCMT-11T304-KEM-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DCMT-32.51-MEM-DMC30UT

DCMT-32.51-MEM-DMC30UT/ DCMT-11T304-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

DCMT-32.51-PEF-DPC15HT

DCMT-32.51-PEF-DPC15HT/ DCMT-11T304-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCMT-32.51-PEF-DPC25UT

DCMT-32.51-PEF-DPC25UT/ DCMT-11T304-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DCMT-32.51-PEM-DPC15HT

DCMT-32.51-PEM-DPC15HT/ DCMT-11T304-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCMT-32.51-PEM-DPC25UT

DCMT-32.51-PEM-DPC25UT/ DCMT-11T304-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

Total: 1466