Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
DCGT-32.52-UEXR-DPC25UT

DCGT-32.52-UEXR-DPC25UT/ DCGT-11T308-UEXR-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

DCGT-32.52-UEXR-DPC35RT

DCGT-32.52-UEXR-DPC35RT/ DCGT-11T308-UEXR-DPC35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DCGT-431-UEU-DNU10GT

DCGT-431-UEU-DNU10GT/ DCGT-150404-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGT-431-UEU-DUP15VT

DCGT-431-UEU-DUP15VT/ DCGT-150404-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGT-431-UEU-DUP25GT

DCGT-431-UEU-DUP25GT/ DCGT-150404-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DCGT-431-UEU-DUP35RT

DCGT-431-UEU-DUP35RT/ DCGT-150404-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DCGT-432-UEU-DNU10GT

DCGT-432-UEU-DNU10GT/ DCGT-150408-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGT-432-UEU-DUP15VT

DCGT-432-UEU-DUP15VT/ DCGT-150408-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGT-432-UEU-DUP25GT

DCGT-432-UEU-DUP25GT/ DCGT-150408-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DCGT-432-UEU-DUP35RT

DCGT-432-UEU-DUP35RT/ DCGT-150408-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DCGW-21.51-KEU-DKU10HT

DCGW-21.51-KEU-DKU10HT/ DCGW-070204-KEU-DKU10HT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCGW-21.51-KEU-DUP15VT

DCGW-21.51-KEU-DUP15VT/ DCGW-070204-KEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

DCGW-21.51-KEU-DUP35RT

DCGW-21.51-KEU-DUP35RT/ DCGW-070204-KEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

DCGX-21.50.2-UEFL-DNU10GT

DCGX-21.50.2-UEFL-DNU10GT/ DCGX-070201-UEFL-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGX-21.50.2-UEFL-DUP15VT

DCGX-21.50.2-UEFL-DUP15VT/ DCGX-070201-UEFL-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGX-21.50.2-UEFL-DUP25GT

DCGX-21.50.2-UEFL-DUP25GT/ DCGX-070201-UEFL-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

DCGX-21.50.2-UEFL-DUP35RT

DCGX-21.50.2-UEFL-DUP35RT/ DCGX-070201-UEFL-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

DCGX-21.50.2-UEFR-DNU10GT

DCGX-21.50.2-UEFR-DNU10GT/ DCGX-070201-UEFR-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGX-21.50.2-UEFR-DUP15VT

DCGX-21.50.2-UEFR-DUP15VT/ DCGX-070201-UEFR-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

DCGX-21.50.2-UEFR-DUP25GT

DCGX-21.50.2-UEFR-DUP25GT/ DCGX-070201-UEFR-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

Total: 1466