Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
CNMG-431-KEF-DKC10UT

CNMG-431-KEF-DKC10UT/ CNMG-120404-KEF-DKC10UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CNMG-431-MEF-DMC30UT

CNMG-431-MEF-DMC30UT/ CNMG-120404-MEF-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Medium interrupted Cut

CNMG-431-PEF-DPC15HT

CNMG-431-PEF-DPC15HT/ CNMG-120404-PEF-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CNMG-431-PEF-DPC25UT

CNMG-431-PEF-DPC25UT/ CNMG-120404-PEF-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CNMG-431-SEM-DNU10GT

CNMG-431-SEM-DNU10GT/ CNMG-120404-SEM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CNMG-431-SEM-DUP15VT

CNMG-431-SEM-DUP15VT/ CNMG-120404-SEM-DUP15VT, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CNMG-431-SEM-DUP25GT

CNMG-431-SEM-DUP25GT/ CNMG-120404-SEM-DUP25GT, Hard & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CNMG-431-SEM-DUP35RT

CNMG-431-SEM-DUP35RT/ CNMG-120404-SEM-DUP35RT, Wear & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CNMG-431-SFM-DNU10GT

CNMG-431-SFM-DNU10GT/ CNMG-120404-SFM-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CNMG-431-UEM-DPC15HT

CNMG-431-UEM-DPC15HT/ CNMG-120404-UEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CNMG-431-UEM-DPC25UT

CNMG-431-UEM-DPC25UT/ CNMG-120404-UEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CNMG-431-UEM-DPC35RT

CNMG-431-UEM-DPC35RT/ CNMG-120404-UEM-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CNMG-432-KER-DKC10UT

CNMG-432-KER-DKC10UT/ CNMG-120408-KER-DKC10UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Large Depth of Cut and High Feed per Rev, Light interrupted Cut

CNMG-432-KER-DKC15RT

CNMG-432-KER-DKC15RT/ CNMG-120408-KER-DKC15RT Tough & Impact Resistant, Low Cutting Speed, Large Depth of Cut and High Feed per Rev, For interrupted Cut

CNMG-432-MEF-DMC30UT

CNMG-432-MEF-DMC30UT/ CNMG-120408-MEF-DMC30UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Medium interrupted Cut

CNMG-432-MEM-DMC30UT

CNMG-432-MEM-DMC30UT/ CNMG-120408-MEM-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CNMG-432-PEF-DPC15HT

CNMG-432-PEF-DPC15HT/ CNMG-120408-PEF-DPC15HT, Higher Feed Rate, with Better surface Finish in stable working condition, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CNMG-432-PEF-DPC25UT

CNMG-432-PEF-DPC25UT/ CNMG-120408-PEF-DPC25UT, Higher Feed Rate, with Better surface Finish in stable working condition, Wear & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CNMG-432-PEM-DPC15HT

CNMG-432-PEM-DPC15HT/ CNMG-120408-PEM-DPC15HT, Hard & High Wear Resistant, High Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Brittle! Not for interrupted Cut

CNMG-432-PEM-DPC25UT

CNMG-432-PEM-DPC25UT/ CNMG-120408-PEM-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

Total: 1466