Catalogs

Unit

Materials












Operation

Hand Orientation

Insert Geometry

Clearance Angle

Rake Angle

Inscribed Circle (I.C)

Insert Thickness

Corner Radius

Chip breaker type

Manufacturer Grade

Total: 1466
CCGT-21.50.5-NFU-DNU10GT

CCGT-21.50.5-NFU-DNU10GT/ CCGT-060202-NFU-DNU10GT, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

CCGT-21.50.5-NFU-DNX10UT

CCGT-21.50.5-NFU-DNX10UT/ CCGT-060202-NFU-DNX10UT, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

CCGT-21.51-NFU-DNU10GT

CCGT-21.51-NFU-DNU10GT/ CCGT-060204-NFU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

CCGT-21.51-NFU-DNX10UT

CCGT-21.51-NFU-DNX10UT/ CCGT-060204-NFU-DNX10UT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, Medium Cutting Speed, Variable Depth of Cut and Variable Feed per Rev, Brittle! Not for interrupted Cut

CCGT-21.51-UEU-DNU10GT

CCGT-21.51-UEU-DNU10GT/ CCGT-060204-UEU-DNU10GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & High Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGT-21.51-UEU-DUP15VT

CCGT-21.51-UEU-DUP15VT/ CCGT-060204-UEU-DUP15VT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard, High Abrasive & Wear Resistant, High Cutting Speed, Small Depth of Cut and Low Feed per Rev, Brittle! Not for interrupted Cut

CCGT-21.51-UEU-DUP25GT

CCGT-21.51-UEU-DUP25GT/ CCGT-060204-UEU-DUP25GT, Higher Feed Rate, Better surface Finish in stable working conditions, Hard & Impact Resistant, Medium Cutting Speed, Small Depth of Cut and Low Feed per Rev, Light interrupted Cut

CCGT-21.51-UEU-DUP35RT

CCGT-21.51-UEU-DUP35RT/ CCGT-060204-UEU-DUP35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Low Cutting Speed, Small Depth of Cut and Low Feed per Rev, For interrupted Cut

CCGT-21.51-UEXL-DMC30UT

CCGT-21.51-UEXL-DMC30UT/ CCGT-060204-UEXL-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCGT-21.51-UEXL-DPC25UT

CCGT-21.51-UEXL-DPC25UT/ CCGT-060204-UEXL-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCGT-21.51-UEXL-DPC35RT

CCGT-21.51-UEXL-DPC35RT/ CCGT-060204-UEXL-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGT-21.51-UEXR-DMC30UT

CCGT-21.51-UEXR-DMC30UT/ CCGT-060204-UEXR-DMC30UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCGT-21.51-UEXR-DPC25UT

CCGT-21.51-UEXR-DPC25UT/ CCGT-060204-UEXR-DPC25UT, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCGT-21.51-UEXR-DPC35RT

CCGT-21.51-UEXR-DPC35RT/ CCGT-060204-UEXR-DPC35RT Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGT-21.52-UEXL-DMC30UT

CCGT-21.52-UEXL-DMC30UT/ CCGT-060208-UEXL-DMC30UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCGT-21.52-UEXL-DPC25UT

CCGT-21.52-UEXL-DPC25UT/ CCGT-060208-UEXL-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCGT-21.52-UEXL-DPC35RT

CCGT-21.52-UEXL-DPC35RT/ CCGT-060208-UEXL-DPC35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

CCGT-21.52-UEXR-DMC30UT

CCGT-21.52-UEXR-DMC30UT/ CCGT-060208-UEXR-DMC30UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Medium interrupted Cut

CCGT-21.52-UEXR-DPC25UT

CCGT-21.52-UEXR-DPC25UT/ CCGT-060208-UEXR-DPC25UT, Higher Feed Rate, Better surface Finish in stable working conditions, Wear & Impact Resistant, Medium Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, Light interrupted Cut

CCGT-21.52-UEXR-DPC35RT

CCGT-21.52-UEXR-DPC35RT/ CCGT-060208-UEXR-DPC35RT, Higher Feed Rate, Better surface Finish in stable working conditions, Tough & Impact Resistant, Low Cutting Speed, Medium Depth of Cut and Medium Feed per Rev, For interrupted Cut

Total: 1466